Fiber Linker Communication Co.,Ltd
broadcasting video transmitter and receiver over fiber, SDI fiber optic extender, HDMI fiber extender, DVI fiber extender, KVM fiber optic extender, VGA fiber optic extender, fiber media converter，
Add to Cart
Overview
The 5x1 HDMI Switcher allows a single HDMI sink to access multiple sources. The Switcher allows three HDMI devices to be switched easily through one HDMI compatible monitor or projector.
The Switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal
Features
l One HDMI 1.3b input signal split to two HDMI 1.3b sink devices
l HDCP 1.2 protocol compliant
l Support 3D
l Support CEC
l Support deep color 30bit, 36bit
l Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC
l Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
l Support signal retiming
l Support input up to 15metres AWG26 HDMI 1.3 standard cable length,
output up to 25metres AWG26 cable length
l No loss of quality
l Installs in minutes
Specifications
|
HDMI resolution |
24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
|
Support video color format |
24bit/deep color 30bit,36bit |
|
Support audio format |
24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i, same format as input |
|
Support audio format. |
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD |
|
Max bandwidth |
250MHz |
|
Max baud rate |
7.5Gbps |
|
Input/Output TMDS signal |
0.5~1.5Volts p-p(TTL) |
|
Input cable distance |
. ≤15m AWG26 HDMI standard cable |
|
Output cable distance |
≤25m AWG26 HDMI standard cable |
|
Max working current |
350mA |
|
Power adapter format..Input |
AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A |
|
Operating Temperature range |
-15 to +55°C |
|
Operating Humidity range |
5 to 90%RH (No Condensation) |
|
Dimension (L x W x H) |
115x61x25(mm) |
|
Weight |
180g |
IR Remote Operating Instruction
1.Firstly take off the plastic film in the rear of the remote board.
2.If you want to select any of the three signal sources to the output, press the 1, 2, or 3 key .Like if you want to switch the 2 input signal to the output, press the 2 key directly.
3.The up/down key in board is for switching the signal to the output circulatedly, and the remote will jump over the signal source input when it is no signal input.
4.The plastic film is strongly advised to put it in the rear of the remote board when the remote is not used for long time.