Fiber Linker Communication Co.,Ltd
broadcasting video transmitter and receiver over fiber, SDI fiber optic extender, HDMI fiber extender, DVI fiber extender, KVM fiber optic extender, VGA fiber optic extender, fiber media converter，
Add to Cart
1. Overview
ASI to IP bidirectional adapter is used for front-end interface equipment of DVB and Ethernet, IP stream transmitter of sending end of program, could make TS stream of MPEG 2 converted into IP data stream for transmission; IP strange receiver of receiving end of program, could make IP data stream of the transmission equipment reverted into TS stream of MPEG 2 for ASI output
2. Features
3. Specification
| ASI to IP | |
| Input interface | 1 DVB-ASI |
| Output interface | 1 RJ45 |
| Interface Features | ASI-DVB standard |
| IP to ASI | |
| Input interface | 1 RJ45 |
| Output interface | 2 DVB-ASI (The same output) |
|
ASI Interface | Input interface: 2-ch DVB standard ASI interface |
| Connector: BNC; impedance: 75Ω | |
| Transmission stream standard: ISO13818-1 | |
| Input effective rate: Max. 214Mbps (every channel) | |
| TS packet format:188/204bytes (Automatic Identification) | |
| TS input mode: uniformity / packet bursting / irregular | |
| Network Management Interface | Ethernet interface: IEEE802.3 Ethernet, RJ45 interface |
| Software protocol: UDP/IP | |
| Power-down status of preservation | Save the last used status, the encoder recovers power and could start automatically and correctly |
| Radiation and safety requirements | Comply with GB13837-92 and GB8898-88 standard |
| Operating environment | |
| Operating temperature | -40℃～＋45℃ |
| Average power consumption | 10.5 W |
| Relative temperature | 10-90% |
| No failure of average working time | ﹥100000 hours |
| Physical features | |
| Volume | 44.5mm(Height, 1U)×483mm(Width, 19″)×410mm (Depth) |
| Weight(KG) | 4KG |
4. Network Management
